Software for Automatic Potentiometric TitratorsAT-Win
Software for Automatic Potentiometric TitratorsAT-Win
AT-Win software enables your PC to control KEM’s Automatic Potentiometric Titrators e.g., AT-710B, AT-700, AT-510 or AT-500N.
When connected to AT-710B, the functions equivalent to AT-710M will be available.
Features
・Navigation function
This function automatically configures measurement conditions based on sample type, analytical objective, and measurement range. Navigation supports your setting up measurement conditions in simple dialogue form.
・Operation permission defined for each user
This system requires a username and password to start the titration program, and the administrator can define which operations are permitted for each user. This function is designed to prevent a user from affecting entire measurement settings.
・Fully GLP conformed
Electrode and sensor: Notice of periodical calibration date and record of calibration. Burette validation: notice of periodical validation date, a record of burette validation, a notice of piston head change date
Check with standard substance: notice of periodic check date, check the record.
Other function: setting of operation permission for each operator, error record
- Windows® 7 or Windows® 10 Easy operation with PC
- It is possible to output data such as results and methods in PDF format.
- ONE AT-Win software can control multiple Automatic Potentiometric Titrators simultaneously. *1
- The navigation function automatically configures measurement conditions settings by inputting category, sample parameter, measurement range, etc.
- It is possible to set a user ID and password to prevent the situation in which some parameters are changed without notice.
- SOP Macro can display arbitrary messages and/or numeric inputs (up to 20 steps) on the screen.
- Fully GLP conformed.
- Operation lock function mounted.
- Automatic folder creation function mounted.
- Any computer connected through LAN to the main computer directly connected to the titrator can perform re-analysis or re-calculation.
*1
One needs as many key code cards as units when using multiple titrators.
Specifications
| Operating system | Windows® 7 Professional (SP1 or later）32 or 64bit or Windows® 10 Pro 64bit |
|---|---|
| Memory | More than 1GB RAM |
| Hard disk space | 40GB or more free space |
| Required software | Microsoft® Internet Explorer® 8.0 or later Adobe® Reader® more than 9.0 or later |
| Display | Resolution of 1024×768 or higher |
| Disk drive | CD-ROM or DVD-ROM drive |
| Serial port | RS-232C D-sub male 9pin or USB port :1 port *1 |
| Expansion slot (in expansion) | One empty PCI or LPCI slot or more |
*1
1) One needs as many serial ports as Automatic Potentiometric Titrators. Also, another serial port is needed to connect a balance or a barcode reader.
2) One serial port may be already used if the PC includes a modem.